|
Sub problems
This has probably been talked about before, but I did a search and found some stuff, tried it and it didn't work. I finished installing my system and everything was working fine yesterday, it was sounding great. I realized that I adjusted my gains wrong and found some info on here for what to do. So today I went out to adjust it, the mids and tweets work fine (Exile Comps running off a D5300.4 bridged to passive crossovers). Then I went to adjust the gain on the subs (DVC 4 Ohm Eu-700s powered by a D5300.2 Bridged) and it didn't really do anything, I could hear some sound, but only when I turned the gain way up. The LPF is on and the frequency is turned up about 3/4 of the way (probably around 100hz) and the HPF is off. Still I'm getting nothing out of them. I know they're wired correctly because they were working fine yesterday. Anyone know what's going on? Or have any ideas I could try? Thanks
__________________
-Mike
|