Little Diamond Review... D612 and D5600 - new Video Added!

[ShowCarTercel]

Originally Posted by RedPhoenix

Sealed 1.1cf

No if its a dual X ohm you use both.

I have a Dual 2 ohm, I wired it so its in 4 ohm on my amp.

So if you have dual voice coils you have to use both of them? I never got a solid answer on this ever.

Because I want to get 2 ohms out of my two Viper Audio 12.2 which are dual 4 ohms. They were in 1 ohm attached to a Viper Audio d600.1, but I picked up a Rockford X6. Which only goes down to 2 ohms. (Ebay and slack days at work shouldn't mix. It gets expensive )

[klaymen333]

makes me want to do an excursion vid of my diamonds...
now if i can only find my camera....

[lucanhookup]

Originally Posted by klaymen333

makes me want to do an excursion vid of my diamonds...
now if i can only find my camera....

u have to make a excursion vid

[bigloubumpin]

Nice vid,but the football looks to be trouble down the road

[RedPhoenix]

football will be gone in like 4 days. and wtf, putfile took my other exscursion video off?!

[RedPhoenix]

Originally Posted by ShowCarTercel

So if you have dual voice coils you have to use both of them? I never got a solid answer on this ever.

Because I want to get 2 ohms out of my two Viper Audio 12.2 which are dual 4 ohms. They were in 1 ohm attached to a Viper Audio d600.1, but I picked up a Rockford X6. Which only goes down to 2 ohms. (Ebay and slack days at work shouldn't mix. It gets expensive )

gotta use both, you need to plan before you buy

[ShowCarTercel]

Originally Posted by RedPhoenix

gotta use both, you need to plan before you buy

But I liking buying, it fills the emptiness inside.

That sub sure it motoring though, I used a flat board to hold my box in place. I would be scared that football might slip into the woofer cone. Especially with that sub moving like that all the time.

[RedPhoenix]

lol football was replaced by a board and a rag right before i read your post but that sub is strong as hell, so it could take it. either way, tommorow my battery box and mid amp box will be made.