Quote:
Originally Posted by tacopower
Does anyone know if the 2010 double din bezel will fit in the 2011? I have the hardest time finding information on that. I spoke to the sales guy here in TX, he said that the 2010-2011 have do difference but didn't really confirm about the radio bezel for me. Thanks
|
I originally had an '07 Tundy and traded it in for a '11. I removed my custom stereo system, head unit, door speakers, rear tweets, amps and subs to put into the new truck before completing the trade. I had to tear into the new door skins to swap speakers as my components were too expensive to give up in replace from crappy JBL paper speakers (my wife loved that
).
So far, everything is exactly the same. My '07 Scosche double DIN bezel is exactly the same size as the '11, the A/C components are exactly the same, the doors internals are exactly the same... so as far as I can tell without actually pulling out the new stereo is that everything should fit fine. Exactly the same, in my sense is that it comes apart and goes back the same, with the same snaps, bolts, etc. I do my own stereo work so I have a good idea of the comparison.
My '07 stereo & A/C fascia was a Piano Black, where my '11 has a black marble design. Doing research I cannot find the new marble design. Scosche advertises the stereo adapter as 2007+. So far I can only find the Piano Black or flat black to match the dash.
Linear Mode
