Does anyone have a wiring diagram for ignition switch on 89 toyota p/u -fuel pump

[Joe0606]

Does anyone have a diagram for the wiring for the ignition switch?
My key stopped working the starter in my truck, I ran a wire to the solenoid on the starter and one to the battery and both in the truck and turned the key to on and bumped the starter with the two wires. Then one day I was driving and the truck shut down. I was able to start it by maintaining half throttle. When I got to my destination it died for good. Now when I turn the key on I get no fuel, but if I turn the key to start I get fuel, although I still can't get it to run. I want to determain if it is the ignition switch by "hot wiring it but I am not sure which wire is which. Also I attempted to jump the terminals to start pump manually and that seemed to run pump but still the truck won't run. Any help is greatly appreciated.

[southern utah]

I have the shop set of manuals for a 90 pickup. I have used it on my 89 and seems to be the same. The wiring diagram is a fold out about 3' long and I could try to scan it in sections.

[Joe0606]

That would be great sorry for the slow reply, I was away. Please let me know if you can scan diagram.
Thanks again!!!!

[southern utah]

will be gone till sunday night if i din't hear back tonight 12/11

[Joe0606]

Last_Enigma@hotmail.com is the E-mail.

Thanks Southern

[southern utah]

Diagram sent in 4 parts, should be able to print and overlay. Hope in is clear enough.