93' Transmission Removal question?

[torakki]

Hi,
I'm new to repairing Toyotas and am changing the clutch on a 1993 2wd pickup. I'm down to the bell housing bolts and not sure how many there are or how to get to the top ones (if there are top ones). I've removed about 5 or 6 around the bottom which were easy to get to but now it's hard to see the rest. Any trick to getting these? Thanks for any help.
Bob

[Hossy]

Should be two bolts at the top. i get them with a long extension. if memory serves me the two wheel drives torsion bars run through the cross member, which isnt removeable, if so just push trans back and leave it or you gotta angle it down at the front to get it out. Good luck.