clutch woes ...

[slacker]

just building my 2wd

engines in ... interior .. well , its drivable ..

took it for a burn and all works great ..but once it warms up ... the clutch wont dissinguage all the way .

I've driven it now a couple of times , and same thing

cultch works great , untill it warms up .. then I can not dissenguage it .

any ideas???

[SoPawToyOwner]

Seems as if you have large amounts of very small air bubbles in your system somewhere. And when the air gets hot as the car warms, those bubbles expand, so after a while you now have a medium amount of very large air bubbles, and when you go to clutch, you are just compressing air at that point.
Beg, barrow, or steel a good vacuum bleeder, and rebleed the system, make sure you keep the master full. You should pour almost an entire small bottle through the system.
If you do it by hand, or by foot, you may just end up with lots of little air bubbles again.

[slacker]

thanks ... I've been thinkin' of trying that .. looks like I will