1988 toyota pickup parts, tons of good stuff plus more

[fast68]

some of the parts i still have left from the 88 as of 2 25 09

NOTICE: the truck was factory A/C delete! so there are no A/C parts from this one!



i have pics of many of the parts here:
http://smg.photobucket.com/albums/v2...0parts%201988/

anything you see or dont see that you are interested in or are looking for then lemme know!

• OEM toyota electrical relays and such from fuse panel etc.
  
• belt idler pulley and bracket from front 22RE engine accessories $25?
  
• good working alternator regulator assembly $22 ?
  
• TOYOTA chrome grille emblem stock '88 style 15?
  
• good driver side parking corner lamp assembly, , $16 ?
  
• air intake duct assembly 22RE 22?
  
• stock 22RE ignition coil $25 ?
  
• spark igniter 25 ?
  
• possible tailgate latching parts if i can figure out where i stashed them over 4 years ago now hmmm
  
• two valve cover mounted 22RE electric vacuum switches, one probably is for the EGR and other for something else on the engine that i dont know, both good shape- one is blue colored and the other one is a dark red or maroon color, $22 pair ?
  
  
  
• very nice working heater core control hose valve assembly - this is located under the hood on the firewall way up at the top and middle, $18 ?
  
  
• good pair of stock factory original wiper arms, painted black, sale pending possibly
  
• dash lights dimmer switch works great $18 ?
  
• many of the gray dash parts, covers,
  
• radio mounting brackets pair $15?
  
• injector wire plug ends x4
  
• nice clean driver side wing vent glass and some related parts

and more




prices are just general, to follow rules here.
package deal very welcome., or trade me for old chevy/gmc full size truck/blazer/burb parts i am looking for many parts '67-72 or '73-80.
need parts such as
stock rear bumper painted,
blue door pull straps with end caps and covers pair('81-87 silverado actually),
'73-80 two-piece driveshaft carrier bearing mounting pad bracket.
original 67-72 wheel covers and hub caps(red or blue bowtie center emblem color)
or 73-75 full wheel covers with fake lugnuts(yellow center emblem color)
good 1975-1980's Q jet carb with auto choke not mounted on intake,
trim pieces inside and out from '67-72 trucks
and more


Randy

[jamesn]

i have an 88 4wd. please give me a price on the radiator, the distributor, TB unit, and the coil/igniter. email me at partsslr@yahoo.com

[yosty]

How much for the pass side tailgate latch and the retainer that the hinged piece of metal clips to, to prevent the gate from opening too far?

Shipped to 85749. Thanks

[yosty]

Originally Posted by fast68

hi there sorry nope i removed and junked the bed just after i got the truck years ago

i may have the straps around somewhere still possibly maybe

not sure if i saved anything else or not, cant remember

i could search if you want?

regards
R

Thanks anyway, I went by the junkyard today and got the parts.

[cityman914]

Is your truck an automatic with a colum shifter? If so, do you still have the ignition switch assembley(the wiring behing the ignition tumbler) and how much do you want for it? Also, how much do you want for the ignitor that mounts on top of the ignition coil? My e-mail is cityman914@yahoo.com

[HoosierTacoma08]

What about a front grill " T O Y O T A " emblem? If so any pics?

Thanks

[krogan]

Do you still have the power steering pump and associated parts, brackets, hoses, reservoir, what about the power steering box, would you happen to have the engine brackets that mount to the bell housing. Thanks

Originally Posted by fast68

all parts listed here in this thread(plus lots more) that i removed this morning from my 145k miles all original daily driver 1988 pickup

all parts\ listed are at least in good daily driver condition, som are mint and some are jut good shape

none of these parts are broken or damaged, or in other words unuseable

pics and part numbers/codes: VERy available just tell me what you want or need

prices: either you can make me an offer mailed, or i can make you an offer mailed to you based on what i feel is fair or reasonable for the type of part and how hard it may be to find another one identivcal to it,
its up to you which way you want to go regarding pricing

anything that you are looking for that might be on a truck like this one then just ask and i can tell you if i have it, or even saved it from this one before i took it to the shredder this morning

• radiator= very nice condition= it literally ALWAYS kept the 22RE in proper operating temperature, has factorstock auto trans cooler in it(bottom tank of course)
• also have the nice shape factory radiator shroud
• 22RE fuel pump works VERy well, also it is mounted on the stock pickup style hanger assembly also in great shape!
• vapor canister assembly, metal round can style factory 1988 with california emission A.I.R. injection system equipped 22RE, nice shape
• good working alternator regulator assembly
• set of four matching 14" original factory correct 1988 toyota 5 lug 2 wheel drive steel gray painted rims, no caps or rings for them
• driver side parking lamp assembly, polishing compund and some buffing and it will look like or better than brand new
• pair of front turn signal assemblies, very complete and with wiring and plugs and all they look nice good fine and work great
• very nice 22RE ignitor and coil- will separate
• nice AFM assembly, entire assembly
• 22RE distributor assembly, ran great, nice shape, have cap and wires and all
• two valve cover mounted 22RE electric vacuum switches, one for EGR and other for something else on the engine, both good shape! blue colored one, and a dark red colored one
• 22R power steering pump mounting bracket and idler pulley also, all bolted together
• TB unit for 22RE, complete minus the TPs because it was no good anymore
• very nice working heater core control hose valve assembly - this is located under the hood on the firewall way up at the top and in the center of the truck
• nice working heater control panel assembly for trucks without a/c from factory, it is all complete with kobs or handles- but no faceplate, always worked great
• ECU or ECM in passenger side kickpanel for 1988 22RE and 4 speed overdrive automatic transmission, ran and works great, part numbers/codes on the case of it are available
• good pair of stock factory original wiper arms, not chromed ones
• dash lights dimmer switch works great
• driver side dash pad - gray
• gray ashtray assembly, good driver condition
• multi function steering column mounted switch assembly = this is the switch assembly on the steering column for turn signals, brights, wipers = this one assembly perfectly and has many years of life still left in it
• driver shape(needing buffed/polished)entire Left hand taillight assembly even with the bulb socket pigtails and all, or will part for lense
• pass side taillight housing with bulbs and wiring pigtails, IE it is complete all EXCEPT for the lense
• nice set of all three matching pickup truck locks -with nice key- this is the two door locks and the ignition key lock
• nice clean driver side wing vent glass

anything you see or dont see that you are interested in or are looking for then lemme know!

Randy

[fast68]

*

[fast68]

*

[sdchargers619]

I also have an 88. I am missing the right side corner light on the front. Would you happen to have one?

[fast68]

*

[tuckman]

how about the fuel pump bracket and vapor canister? did they hit the trash? i will check you out on ebay too.

thanks

brian

[ND94Toyota]

I am interested in the fan/radiator shroud if you still have it. PM me or post here.

I am in Oklahoma 73020.

Thanks,
Nathan

[tuckman]

I would like both parts, the hanger without the pump and the vapor canister. My problem is i am in canada and wondering how much it would cost to ship USPS to, Lindbergh, Alberta, Canada T0A2J0? or if they could be in texas 79735 by july 16 my old man could bring them up. i know that is pushing the time limit but i thought i would ask. just tell me what you would prefer to do for shipping and method of payment. also how did you go about attaching the deck to that '88? i have an 86 and the box is rusted out and i am looking fo ideas on putting a deck on in its place.

thanks

brian

[chophog]

Heard you dump the bed, but just wondering if you had the fuel door? Thanks