Quote:
|
Originally Posted by sloppybeak
IM sorry. It looked a lot worse in print than what i intended it to.Guess i will pass on this forum, because I dont really see why someone cant tell me a simple thing like a nice powerfull amp that will drive a avaerage pair of 300 watt 8"subs. My Linear Power 2202IQ wont drive them loud enuf, even though its a quality amp. I know a lot of the "high powered " amps for not much money are BS. I guess if i can find a 300 watt amp for 500.00 or something, thats about all I can guess. I dont expect any help now. I cant even believe myself I made a seperate post about it too; much beer.
|
Well, just so you'll shut up about it, I'll assume that you're talking 300 watts (rms) at 4 ohms (DVC) x2 - typical setup. First of all, if you don't have a ported box, get one and try that for something a little louder.
The
Profile AP/California Series are supposed to be good on a budget. Wire the subs to two ohms each (four ohm final load) for a little head room and keep the gains a little lower.
Or bridge
this Kicker and wire your subs to 4 ohms final load to give each of them 300 watts.
Enjoy.
