feeler: parting out (AE82, 20V, yadda)

[EverAE]

ok guys im thinking of parting out my project car. i just dont have the time or money to finish it. its an ae82 fwd sedan (1987).

things up for grabs:

-1st gen silvertop 20V 4a-ge: has a c52 tranny with equal length axles, cv shafts are new (one being rebuilt by myself, and the other being a brand new unit), has new plugs in it (ngk iridiums), has new belt from toyota (alternator/wp, a/c and ps deleted), new cap and rotor from toyota, TRD 5 spark plug wire set, new timing belt, billet fuel filter, new thermostat, heat wrapped factory headers, custom sri (vibrant mandrel 90, M's afm adapter, K&N/M's filter, filter should be replaced), all sensors, ignitor, coil, etc. the wiring harness is essentially plug and play for a 4alc powered ae82 (or you can use it to make your own), new rad hoses, AE111 levin BZ-G (20V bt) radiator, im sure theres more. asking $1200, this is everything you need, dont offer low prices, or say somewhere else is cheaper, this drivetrain is ready to drop in, theres no hunting around for those hard-to-find parts that will need to be replaced with a fresh imported engine.
-TRD short shifter for ae92/ae82, JDM, already installed shifter housing, basically brand new (includes TRD shift knob, still in wrapper), asking $175
-custom oil cooler setup made by yours truly, basically brand new. earls thermostatic billet aluminum sandwich plate (maintains oil temp between 160-180 deg.), B&M/TruCool oil cooler, and Earls and Russell AN fittings and steel braided line. asking $300 obo, should fit any 4 cyl toyota iirc (has $200 worth of lines and fittings alone).
-Buddy Club Japan race-spec, agm, lightweight battery, basically brand new, $150
-Buddy Club Japan race-spec condenser/ground kit, basically brand new, asking $150
-walbro 155lph (300 hp) inline pump, basically new $90
-jazz pro-street fuel cell with foam, 16 gal, $200. will do walbro and cell, with in trunk lines/fittings for $275
-new brakes all around, ae82 up front (pads, rotors, and 1 new caliper, other one is good), new front flex lines, brand new toyota rear brake lines (hard lines), ae92 rear disc brakes, new pads and rotors, calipers, proportioning valve.
-KYB front full struts, bnib, ae82 sedan, $125
-AE82 JDM front grill, $50 obo
-AE82 FX-16 GT-S oem side skirts and fender flares and rear flaps, $100
-JDM Precedeo Demon Camber 2 piece rims and tires, 15x7's, +19, 4x100/4x114.3, fronts have brand new 195-65-15's on them, rears have used bridgestone potenzas on them, one lip has dent, holds air and balances fine, nitrogen filled, balanced, very rare rims, $700
-misc. body parts, lights, etc.
-universal vibrant performance 2.5" in cannon, bnib, $75
-any interior stuff, awesome shape, navy blue
-ae92 gt-s stock strut brace
-im sure im missing shit, ask, i probably have

will post pics and vids soon, located in London, Ontario, will ship

[HACI_corolla]

I need the sideskirts, what color are they?

[EverAE]

white, pics (more up to date coming):

[HACI_corolla]

did that engine bolt into that transmission ok?

[EverAE]

ya im using the tranny that came with th engine, any a-series corolla tranny works.

[tolisspi]

Do you sell parts? Pm me.

[toyotaspeed90]

um, why?

[tolisspi]

what ehy?
sell or not?

[Punkrampant]

Hey, are you still considering parting? I just picked one of these up and need a few parts. I am interested in both front fenders if there is minimal rust, the headliner, the heater/fan controler, the center console lid. Also need a windshield but dont know if you'd be willing to pull that. PM me on here or email: Punkrampant@hotmail.com. Im located in Goderich so i can pick them up.

-Andre

[fredricktflail]

How much do you want for the driver fender and headlight?

[Dryden]

can i have more pics of motor? i'm interested in a few parts aswell. thanks!

email- dryden311@hotmail.com

[seii]

I've got a speedo cluster on the fritz right now in my FX16...could I get a pic of yours? If its the right kind, it might be just what I need.

Email: hvnbnd2307@hotmail.com