Quote:
Originally Posted by naildriver
Is there a way to wire around the igniter assembly on a 2tc engine and just run a coil?
|
Anything is possible if you try hard enough - but it's not necessarily a good idea. The 'igniter' is really what provides signal amplification from the distributor-mounted sensor - it's the part that actually 'fires' the coil. The sensor gives a 1/2 crank-speed-signal, the igniter switches the coil circuit to generate the spark.
So, if you're running electronic ignition with a sensor, the 'igniter' is a critical part. Unless you want to McGyver something like old-school points, or go aftermarket for the distributor/ignition, you're pretty much stuck.
BTW, the
Link has a good summary for the Toyota ignition system principles of operation.
Linear Mode
