3tc engine build - Toyota Nation Forum : Toyota Car and Truck Forums

richard5 · 08-02-2009, 06:17 PM

so i'm planning in either build my 3tc engine or drop in a 4age. my goal is to run 15's in the quarter mile N/A. passing emissions is not important. i was planning on using the crankashft and connecting rods from a toyovan engine and having the block bored over .040" with an american cam 280. i would use the stock pistons but obviously oversized and was wondering how much i could mill the head to bump up compression or what pistons i could use

EdgarTRD1.8 · 08-03-2009, 11:55 PM

Metele unos pistones arias 12.5:1 de compresion con bore a .060" y usa el cigue~al original. Un palo 280 te da bn arranqe pero tiende a amarrarse en alta, tienes q jugar con el diferencial y acuerdate darle degree al palo. Y una portiadita a la tapa... de seguro tocas los 14.

fredricktflail · 08-06-2009, 02:29 AM

English please.

EdgarTRD1.8 · 08-06-2009, 11:40 AM

Quote:

Originally Posted by fredricktflail

English please.

No problem, he understood me.

richard5 · 08-07-2009, 02:29 AM

jajaja i'm not surprised. apuerto rican helped me. i'm from carrito.net too but mi nick is protege5 driver

EdgarTRD1.8 · 08-07-2009, 11:33 AM

Quote:

Originally Posted by richard5

jajaja i'm not surprised. apuerto rican helped me. i'm from carrito.net too but mi nick is protege5 driver

Ok I saw you before in a couple of post in the carrito.net Toyota's forum, my nick overthere is the same in here. Anyway any help you need, I'm here and there.