Running wires through the firewall? (or any part near the front)

[ChpStcksRlz]

I need to pass wires through the firewall so I can install LED lights into my foot wells, does anyone know of a place to pass them through?

Thanks

[Kiwi-Corolla]

Welcome to the forums! Typically you can pass the wires through an existing rubber grommet, either from the engine bay side or from underneath the dash. You may find these threads useful:

NEED HELP! Pre existing holes in firewall??

Breaching the firewall.


Here's some threads from the 10th Gen Corolla forum which may come in useful too:

Amp-Pwr-Wire Through Firewall on 09 Corolla LE

'10 Corolla Firewall - Amp power wires

Amp wiring/firewall

How to run a pair of wires through the firewall?

where is the hole in the firewall?

firewall question

[ChpStcksRlz]

Is there pictures on the 9th Gen where I can specifically find these? I looked at both the threads and there's no specific location given excluding the passenger's side. But where exactly?

Thanks

[mopars&corollas]

for no more current then you will be drawing (probably) there are a ton of points you could pull power from- the power points/cig lighters spring to mind. there are others-
just a thought. I have drilled a hole through the fire wall (wouldnt recommend) and there are lots of places a small wire could piggyback thru