AE92 1/4mile time from SA

[2CAMS]

Hi Gents just some info of my runs Yesterday @ Aldo Scribante Raceway in Port Elizabeth South Africa
Ran a little slower than personal best (15.634) yesterday Best time yesterday was a 15.672 with an exit speed of 143.1Kh/h
Messed around with tyre preessure which i never did before and was my mistake aai front was 1.5bar and rear pumped up to 3bar ...
struggled to get off the line couldn't take advantage of the nice weather and track condition
other times @ the event 15.747 exit speed 142km/h, 15.935, 141.2km/w, 15.926, 140.9km/h, 15.865, 141km/h
270 intake, 264 exhaust regrind cams with lengthened valves, worked head, verniers not adjusted yet and running off stock 4AGE ECU
14" Dunlop SP Racer 185/60/14 tyres Pics of front end
Last tun on a Dyno the car made 113.4w and 163Nm




previous Show and share thread updated ==> 4AGE 16V Head Swop

[Donald]

Nice and clean under that bonnet.

[NZAE92]

that is the tidiest corolla i have ever seen and that engine bay is just immaculate

[2CAMS]

jees thanx for the comments ...
I'll post the rest of the pics from the event when i get them ...

[2CAMS]

LATEST Dyno Sheet
115Kw is 270 exhaust, 264 intake, SMT6 mapped and verniers adjusted
113Kw is 264 exhaust, 270 intake, SMT6 RESET and verniers on stock marks **CURRENT**

Latest car Pics, it is in a dirty state though

[Donald]

Well, did you beat the VW?

[89yotarollagts]

dam nice times !! Very clean car too !! lol you did better then my ZE last year

[2CAMS]

nope that VW GOLOF is 1800cc with 276 CAM, 150Kg lighter and runs constant 15.1 runs
and it is a friend of mine, it is again in the following pics

latest pics from last legals 02 August 2009 ... ran another 15.6 there








Next week if the Recession gives me a breather I will be tuning my 2CAMS

[kcwa]

What headers are you using? Surprised that the finish is looking so good...

[Ghostyman]

For comparison, my stock 4AF runs 18s.