A/C swap

[chip369]

im swapping the A/C out of a ae82 i scrapped a few months back, and fitting it in the ae92

so far so good, the compressor and radiator have fitted with no major dramas.

i seem to have the wires and connectors for the thermo fan and the connections on the pipes near the firewall, already apart of the main loom.

i dont however have the wires for the compressor or the a/c relays, could someone direct me to a wireing diagram? i have a gates manual and wireing diagram, althoe its a bit confusing as it is one diagram for the entire engine loom covering 4 different engine types in one..

also, the bottom pipe, from the compressor to the left side of the car, could someone take a photo to show me where to run that pipe? (i'll prob have a look tonight and figure it out, but i was having trouble between the oil cooler hoses and engine mount.)

anything anyone wants to give me a heads up on would also b appreciated

[chip369]

what are the odds that the pipes on the ae92 are different?

i've managed to fit the hose from the radiator to the compressor, and have the hose from the compressor to the left side of the car in place, connected at the compressor end, however im not sure its routed properly. the pipe that comes up the left hand side (of the car- right hand side of engin bay) and connects to the large pipe leading back to the firewall doesnt seem to fit at all.
i'll be heading to the wreckers tomorrow, to see if i cant find a compressor loom, and i think i'll see if i cant look at and buy the pipes for the right hand side.