One Touch power window switch

[Hiroyuke]

On my 2009 Corolla S, the driver's window switch is a 'one touch' type that lowers the window completely when pushed all the way down. Does anyone know if there is any way to add this capability to other windows, such as the front right, or even the rear windows?

I believe the 'One Touch' feature is programmed into the BCM. Is it possible to reprogram the BCM to do that on other windows? Is hardware (different switches) necessary?

[gold94corolla]

You would need to get the auto switch for each other window. As you can tell, the auto switch clicks differently to activate the auto motions.

[SuperchargedMR2]

This was discussed before & I thought I remember that it would be difficult to do. My 10 Prius has them for all windows & it is a nice feature but not a must have IMO.

[Dimaoala]

Wonder if you can just find a totaled Prius, Camry, etc. (those that have that feature) and swap out the window switches.

[c_huynh32]

Why is Auto Down needed for all windows? cuz how often do you really put down all windows front and back ... especially the 2 back windows.

I understand Auto Down for Driver and Front Passenger windows :P

[nate89]

Originally Posted by c_huynh32

Why is Auto Down needed for all windows? cuz how often do you really put down all windows front and back ... especially the 2 back windows.

I understand Auto Down for Driver and Front Passenger windows :P

Every time I drive I gave all the windows down since I hate using A/C (makes ya weak lol). One touch up/down would be nice, but it's not a huge inconvenience.

[FlawedLegacy]

^ +1. I have all 4 down unless wife is with me (princess needs air)

[msncorolla422]

When I had the camry's the auto up and down on all windows were very nice but weren't necessary.

[Hiroyuke]

Thanks one and all for the replies. I am thinking about adding this as a convenience feature, primarily for the front windows. My 03 Silverado came with this on both windows, both switches on driver's side are one touch down.

The switch assembly in the driver's door of my Corolla appears to be made as one block of four switches, so it likely would have to be changed for one that has one touch down feature on all windows. I assume that a one touch individual switch would also be necessary for each door I want that feature on.

Does anyone know if the mentioned '10 Prius switch assembly for the driver's door is a plug in fit, requiring no mods to wiring or mounting?

BTW, Hiroyuke is the wife's chosen name for the car, but we both have enjoyed it greatly since our purchase in 2008.