Official second generation Avalon picture thread!

[Dana_15]

Let's see them

[TheBigKahuna]

My bone stock 2000 XLS..........

[img]http://216.77.188.54/coDataImages/p/Groups/92/92668/folders/274759/2306558avalon1.jpg[/img]

[TheBigKahuna]

Got the windows tinted. 40% Llumar film.





[img]http://216.77.188.54/coDataImages/p/Groups/92/92668/folders/51635/2317112avalontint.jpg [/img]

[SDtundra858]

[peanutbutter]

stock

[racecraze]

Its nice to see the 2nd generation Avalon pictures.

[KoG506]

http://picasaweb.google.com/Lilaznki...eat=directlink

Stock 2000 Toyota Avalon with 8000k HID Lights

[SullenScreamer]

Originally Posted by KoG506

http://picasaweb.google.com/Lilaznki...eat=directlink

Stock 2000 Toyota Avalon with 8000k HID Lights

where did you get your HID lights? Is it the same for the High Beam, Low Beam, and Fog Lights?

[KoG506]

Originally Posted by SullenScreamer

where did you get your HID lights? Is it the same for the High Beam, Low Beam, and Fog Lights?

I have HID on the Low Beams and not for high because i barely use High Beams. if You were to add HID on high beam, use will lose daytime running light (DRL). For the fog lights, It uses same type of bulb as low beam. The Bulb type is "9006 (HB4)". If you want pictures where I placed the ballast (For the Low Beams) just ask. I don't know where a secure place to put the ballast for the fog lights.

I got it from:

http://cgi.ebay.com/ebaymotors/HID-X...fAudioQ5fVideo

I'm currently using 55W HID kit, They are brighter. Some people sell 35W Kit? but they aren't as bright as 55W Kit but bright then Halogen.

I recommend you put Relay Harness. to protect the car's factory electrical system because without the Relay Harness, the ballast draws more power throw the factory electrical system, will might burn the whole system.

http://cgi.ebay.com/ebaymotors/9006-HID-Xenon-Relay-Wiring-Harness-W-25-Fuse-40-AMP_W0QQitemZ180438396860QQcmdZViewItemQQptZMotors _Car_Truck _Parts_Accessories?hash=item2a02f76fbc

[SullenScreamer]

Originally Posted by KoG506

I have HID on the Low Beams and not for high because i barely use High Beams. if You were to add HID on high beam, use will lose daytime running light (DRL). For the fog lights, It uses same type of bulb as low beam. The Bulb type is "9006 (HB4)". If you want pictures where I placed the ballast (For the Low Beams) just ask. I don't know where a secure place to put the ballast for the fog lights.

I got it from:

http://cgi.ebay.com/ebaymotors/HID-XENON-CONVERSION-KIT-H1-H3-H4-H7-9005-9006-50W-55W_W0QQcmdZViewItemQQhashZitem3a540e3af2QQitemZ25 0518321906QQptZCarQ5fAudioQ5fVideo

I'm currently using 55W HID kit, They are brighter. Some people sell 35W Kit? but they aren't as bright as 55W Kit but bright then Halogen.

I recommend you put Relay Harness. to protect the car's factory electrical system because without the Relay Harness, the ballast draws more power throw the factory electrical system, will might burn the whole system.

http://cgi.ebay.com/ebaymotors/9006-HID-Xenon-Relay-Wiring-Harness-W-25-Fuse-40-AMP_W0QQitemZ180438396860QQcmdZViewItemQQptZMotors _Car_Truck _Parts_Accessories?hash=item2a02f76fbc

Can you put a silverstar ultra bulb for the high beam and put the hid for the fog lights and low beam. Could you post your picture on where you placed you ballasts so when i buy the HID lights i will have an idea of placement.

[KoG506]

Originally Posted by SullenScreamer

Can you put a silverstar ultra bulb for the high beam and put the hid for the fog lights and low beam. Could you post your picture on where you placed you ballasts so when i buy the HID lights i will have an idea of placement.

Yes you can and here are the pics:

http://picasaweb.google.com/Lilaznki...64881714367138
I used zipties to secure in place

http://picasaweb.google.com/Lilaznki...64897818568930
I screw in the hole near the reservoir

http://picasaweb.google.com/Lilaznki...64910971261746
The Relay Harness, place in with the other wires on top of the fans.

[SullenScreamer]

Oh did you have to do the alignment of the bulb after you installed the HID bulbs

[KoG506]

Originally Posted by SullenScreamer

Oh did you have to do the alignment of the bulb after you installed the HID bulbs

No.I took the old one out, then replace with HID then done.

[SullenScreamer]

could you if it is not too much trouble take a picture of your HID lights in the dark i just wanted to see the distance and power the 8000K has in the night

[Akanishisan]

a drive at night


painted housing. i posted a thread about this but what do you think? any ways to make it look less...i dunno...weird??? haha. i think it sticks out too much :/