need angel eye prjector headlights for 06 Avalon HID refit

[messerchmidt]

hey all, looking for a set of HID projector headlights (pref with an angel eye style projector) for my 2006 avalon limited xls.

Anyone know where I can get some? (for a good price)

I cannot find any oneline,

thanks

[desentrix]

"(pref with an angle eye style projector)"

u mean like a AFS projector? I believe the RX330 has one.

[messerchmidt]

something like this

[messerchmidt]

anyone? or I am going to have to retrofit projectors into my stock headlights? if so, any guides?

[messerchmidt]

I cannot seem to find them after market, got a source?

[DSMer]

Originally Posted by JJJJJJ

Isn't HID stock in several 2008 avalon models, so you may find them and see if they fit.

HID's only come on the Limited from the factory. Good luck finding those

[DSMer]

Found some for you
http://cgi.ebay.com/ebaymotors/2007-...Q5fAccessories

http://cgi.ebay.com/ebaymotors/05-08...Q5fAccessories

Here is a bolt in, complete kit I found for you: Everything you need.
http://cgi.ebay.com/ebaymotors/05-06...Q5fAccessories

The last link is a pair of OEM TOYOTA HID headlights from a Limited.

[nike23spoon]

if will b a lot of work retro fitting projectors into the avalon headlights as it seems no one has done it
if u want hid, u can try the plug and play kits.
as the US models comes with D2R. so the housing should be designed for use with HID's
i know for mine even though i don't get projector kind of cut off
but compared to other reflector housings, the hid lights coming out of my housing is well contained and not scattered all over the place.
checked and seems fine with pnp kits with non direct glare that you get from the euro cars

[DSMer]

The XL and XLS headlight housings (hologen) are completely different than the Limited (HID) headlight housings.
A plug and play HID kit will still have glare issues.

[messerchmidt]

Thanks!!!

I bid on the complete kit.

I was quoted 250$ to install tsx projectors in my existing headlamps. Guy would cut them, put them in, etc. I have seen his work, its ok, but I do not like having caulking and tape on my headlamps because they will eventually leak + I am destroying a perfectly good pair of oem headlamps. Was a last resort.

I have an 06 XLS, in Canada we do not have the XL or limited models, just the XLS.

If I had pickedup a used es330, it would have come with HIDs, and even if not, its not a problem finding aftermarket camry projector headlamps for it. Not much aftermarket for the avalon.

again thanks again!

[DSMer]

Glad i could help brother. Post a update!

[messerchmidt]

i won the auction for the oem set from the US, guy shipped it yesterday. will post pictures of it once its installed.

[messerchmidt]

Originally Posted by JJJJJJ

How much did you end up bidding for them ?

I bid the reserve, 450$ usd. Going to install them this up coming weekend