Anyone Open the backs of there seats befor?

[hghflyrjd1]

I need to get to the insides.I want to wire in some headrest tvs?

[00avxls]

I put some headrest tv's in mine. There's two screws on the bottom of the back seat (the plastic part) then just pull down and out.

[hghflyrjd1]

Originally Posted by 00avxls

I put some headrest tv's in mine. There's two screws on the bottom of the back seat (the plastic part) then just pull down and out.

Which units do u have..And how hard was it to wire up to the fuse box and power.?DO yours stay on or do u power them up from the units them selfs

[00avxls]

I have some farenheit headrests with 8.8"monitors built in. I have a kenwood flip out screen and the "brain" for it is underneath my seat so I just tied the power to the monitors with the power to the radio. I have to turn mine on

[hghflyrjd1]

There are two screws at the bottom center of the plastic part then it pulls down and you will see two wedge type parts the u push back onto a horizontal rod to put it back on to.Make sure to push them ONTO the rod tight and then reapply the 2 screws