20v 4AGE swap into AE86

[Hachi Driven]

How easy is it to swap a 20v 4AGE into a AE86. Ive read that you have to re-wire the harness, but if you had another harness and ECU i guess you wouldnt have to do that. Im not sure but i think the 20V 4AGE is RWD i could be wrong. But between the 16V and the 20V which is better. ( which has a more extensive aftermarket.). If i did the swap are there any clearance issues in the engine bay. Thanks

[REN69]

-Is not as easy as it looks
-Either way you still have to rewire as the 16V and 20V harnesses are different so you still have to get the 20V ECU and wiring together.
-20Vs only came in FWD so yeah, you ARE wrong.
-20Vs have more aftermarket than the 16Vs but still nothing like a B16
-You would have to cut or bang the firewall in order to fit the 20V motor
-you're welcome

[micro214_kp61]

Originally Posted by REN69

-20Vs have more aftermarket than the 16Vs but still nothing like a B16

what have you been smoking again REN? the 16V by far has more aftermarket support here in North America and Japan.

[thespud]

^^ Agreed. Same in Oz. No aftermarket for 20v here

[lex_addict]

Originally Posted by REN69

-You would have to cut or bang the firewall in order to fit the 20V motor

unless u go with a DLI setup