Turbos for 4age small port??? - Toyota Nation Forum : Toyota Car and Truck Forums

Hoggie4th · 11-19-2005, 03:15 AM

I have been shopping around for a turbo kit for my ae-92 rolla. if anyone is impressed with theirs or who knows who makes a good one for a good price let me know! Thanks
Crispin

Flashmn · 11-19-2005, 04:19 AM

D-I-Y turbokits are the best.

89yotarollagts · 11-19-2005, 02:38 PM

i dont think you will find a kit for the ae92... like flash said your better off making your own setup 1. because it will most likely be cheaper & 2 you can build it up for your needs

toyotaspeed90 · 11-19-2005, 08:56 PM

the exhaust ports on a bigport and smallport are the same..... meaning, you can find manifolds for any 4age

epyon22 · 11-19-2005, 11:24 PM

your going to have a really hard time finding headers for the turbo setup i recomend custom fabricating your own either learn to weld or find somone who knows. it will be cheaper and alot less hassle than trying to find one on the net

TwinCamGuy · 11-20-2005, 01:41 AM

Forget about making one yourself.Just get the HKS manifold.
Here you go http://www.hksusa.com/products/?id=657&rsku=

Hoggie4th · 11-20-2005, 01:59 AM

Thanks So much! ive been looking for another DIY project on that car

i have a moderate ammount of welding experiance but i could do with some talking thru it. does anyone have any previous knowledge of what metals to use or stay away from, pipe lenths, widths or directions or configurations that best fit a turbo it would be wicked to know before i start cutting! and my internals should be ok with just a stage one? right? thanks!

89yotarollagts · 11-20-2005, 12:20 PM

Quote:

Originally Posted by TwinCamGuy

Forget about making one yourself.Just get the HKS manifold.
Here you go http://www.hksusa.com/products/?id=657&rsku=

that mani is for the RWD corollas !! does that make a diff or what ? i would like to know this my self

Thanks
Dan

Flashmn · 11-20-2005, 12:45 PM

if its a high compression 4A-GE, no the stock pistons wont work, gotta drop the compression.

***REN69*** · 11-20-2005, 02:08 PM

In other words.. do up a bigport.. the smallport has a bigger chance of getting blown.

I'm wondering the same myself.. will that manifold work with FWD setups? As it says for 85-87 Corolla GTS. I'm guessing if its ONLY the manifold it will work if the outlet is setup to point down. But if its setup to point towards the left, it might not work on FWD.

micro214_kp61 · 11-21-2005, 02:15 PM

there are couple of guys on www.homemadeturbo.com that sells exhaust manifold kits (meaning you still need to weld, but they'll give you everything including proper flanges).