Clicking Noise

[VaRolla91]

Hey Hey,im hearing a Strange clicking sound from the Front drivers side wheel of my Car,at First,i thought.CV joint...And lo and behold...Needed a New CV joint (outter)...so,had the Axle replaced at a Local garage...(couldnt get it out myself..didnt trust myself to a slide hammer) the WHole Axle...Joints & all...and im still hearing the sound..It Goes along with the Rotation of the wheel..Now,this is the only other thing i could think off....my Alignment is Off slighty...the car pulls to the Right...And the Sound Stops when i Go around a LEft Curve..so if it was Nascar i'd be good..but its not..Could my alignment be causing this noise??? any help is appreciated,and Btw the car is a 1991 AE92 Sedan...4A-FE..Auto if that info is relevvant to the problem...thanks again in advance

[94_Rolla_Guy]

wheel bearing perhaps?? How many miles???

[VaRolla91]

160k...its a Trooper...im the 2nd owner my mother being the First And wheel bearing...thats something for me to Check into...i'll be whipping out the handy Dandy hanyes Manual in just a few Thanks & thanks

[cexsiman]

i feel like i am having the same problem, i have a 92 le and my drivers cv (whole thing) was replaced not even 5k mi ago, and now i know i need a cv on the passenger side, but it is making a sound like there is a loose soda can wrapped around my axle? if that makes any sense. but only when i am on the gas, and below like 35/40 mph. it doesnt make the sound when i rev the car in neutral so i know its not the engine, so its tranny on down. and i know i need a front cv on the passenger side, but it is making a sound like it might be a bigger problem than just that. any ideas?

[prophase]

The way to know if it's an axle or CV is it primarly happens when turning. Only a super worn CV or axles will click while going straight.

[retiredat44]

while on a jack, with wheel off the ground,, take the front and bottom and yank the wheel back and forth, top and/or bottom in/out, if there is any wheel bearing slack it wil click back and forth. I hate the wheel bearing design on these cars. they last forever, but replacing them is a major pain in the ass!