7A-FE to 7A-G(Z)E

[Patman525]

i went to corollaperformance.com and saw that it is possible to swap the 4A-G(Z)E cylinder head onto the 7A block. This sparked my interest, and i was wondering what a swap like that would totally entail. I'm assuming that if i find a G cylinder head, it won't come with the 4A-G(Z)E pistons, so i'd have to get those elsewhere. ccan they be found on the internet? I haven't checked yet, and i may be able to answer that question myself, just haven't had the chance to. is there anything alse i would need to do or get for this swap?

[punter]

I have a mate who ran a turbo one in the NZ drift comp specs are

Standard crank and rods- modified 7a gudgeon pins
8.0-1 ze pistons
Blacktop 20v head
std acl head gasket
arp head studs
std 7afe flywheel
custom adjustable cam wheels
4age tensioner
Porshe 944 turbo cambelt
S13 ca18det T25 turbo
custom turbo manifold.

The compression with those piston was 7.6:1 so he decked the block down 0.3mm and used a 0.5mm head gasket, to regain 8.0:1.

So thats gives you a basic idea of the setup.