SAFC and 95 7afe corolla

[southwest2118]

I know somebody has asked this but they didn't get any help...

Any body know what to set the pins to on the first gen SAFC(with the five knobs)?

WHat about the pin layout on the ecu?


its a 95 7AFE corolla.

[94_Rolla_Guy]

Go here....http://www.apexi-usa.com/support_wiring.asp then go to SAFC vehicle specific apps. Now if your cars standard use T4-B (toyota) thats what i used 99.9% sure. If its auto i Think T5-B (toyota)would do the trick but i would cross reference the ecu pinouts with the diagrams before you cut any wires.

I was using the AE101 with 4A FE using a year range of somewhere from 91-95 look for a "pressure signal" as your engine is MAP based.

Also make sure your car isn't OBD2 because if it is i dont know if the SAFC is compatible!