blacktop speed sensor fix???

[gasman]

ive recently put a black top into my car and it goes fine and all but the rev cut is only at 7600 and stock is 8200 from what i heard.

what are my options for putting in a "device" to feed a siginal back to the ecu so that the rev cut is bumped back up to its natural habitat?

im trying to avoid the magnetic reed switch option as i dont want to be strapping magnets to my drive shafts that would eventuall fly off and wires becoming tangled with the shafts etc.

cheers

[micro214_kp61]

you car is originally carb equipped right? if yes, you need a speed sensor from 2nd Gen 3SGTE AWD Celica. it should solve your problem. i had the same problem before. the engine goes to a safe mode once it hits 7600rpm.