Noob Question? 1991 corolla 4afe engine supercharger from a 4agze

[fordsho]

i read a couple of posts and someone stated that 4agze supercharger would bolt up to the 4afe engine. im planing on geting it but i need to do research first any help would be aperciated! thanks in advance

[toyotaspeed90]

have fun with that one......

[fordsho]

Is it immposible i know if i run the supercharger around 4 psi it should be safe on the engine but i plan on changing the heads and pistons so i can possibley go up to 6-7 psi which should get me around 180-185 hp? maybe?

[Flashmn]

4 psi lol...

[REN69]

Originally Posted by toyotaspeed90

have fun with that one......

LOL!

[toyotaspeed90]

Originally Posted by fordsho

Is it immposible i know if i run the supercharger around 4 psi it should be safe on the engine but i plan on changing the heads and pistons so i can possibley go up to 6-7 psi which should get me around 180-185 hp? maybe?

don't make me cry from laughter

yes, it will bolt to the block IF you remove all accessories on the intake side of the motor.... the starter can stay there, however

then you will need special piping... because the s/c manifold & piping is meant for the gze... the heads & porting on the heads are way different (different angles as well)... so you will need to take the s/c inlet/outlets and cut/tig weld/modify them to route around the 4afe manifold