SR5 Carbon parts - Toyota Nation Forum : Toyota Car and Truck Forums

4AC = AE71 · 06-22-2006, 09:46 AM

sorry for asking maybe a dumb question but i wanna know if anybody has any info on carbon body parts for the 87 SR5 rolla? also does anyone know if a GTS h/b body panels will fit a SR5 coupe? sorry for being noob but need to know cause i'm planning to do all carbon/all jdm on my car...

EJ86 · 06-23-2006, 04:28 AM

CF available for the AE86, that I know of are:
CF hood
CF sunroof
CF fender flares
CF Zenki lip
CF headlamp covers
CF door panels
CF sideskirts
CF dash board cap
CF fenders
Cf radiator shroud

Some parts can be ordered @ www.modifiedinc.com, ebay, technotoytuning.com, driftfactory.com

Flashmn · 06-23-2006, 05:16 AM

87 Sr5 = Ae92

freakinbox · 06-23-2006, 05:50 AM

87 sr5 is the ae86, 88 was the ae92?

like sure really the 88 was sold in 87.5/88.5 but if you go to buy parts for it they have it listed as an 88

***REN69*** · 06-23-2006, 06:16 AM

Actually anything built from 06/87 and up is AE92, anything before that was AE82 (FWD) and AE86 (RWD).

As for body parts, anything from the doors forward will fit the Coupe.. from the doors back, well obviously not everything.

4AC = AE71 · 06-23-2006, 07:38 AM

EJ86,thx for the site but it doesnt work

. and yes my sr5 is a ae86, it was made i think maybe a month before they stop making RWD rollas,so i got the alomst the very last of rwd rollas. well i'm planning to carbon it out but i need web sites to go to,i only found 1 site the sales carbon doors. so anybody plz throw in your 2 cents

freakinbox · 06-23-2006, 08:04 AM

could always make your own with the panels you have

Flashmn · 06-23-2006, 08:17 AM

Without a vacuumbag and autoclave system its gonna be hard. Especially the fenders. Straight panels isnt that hard, but the fenders have 90deg corners, which is gonna be fun when you try to get the mold off in one piece.

4AC = AE71 · 06-23-2006, 08:35 AM

yeah i chould mod my oem fenders but i know it would be hard to do, if i mod fenders it will be only for to to put 13x8 wheels. but dont wanna drift off topic,all i really want is a trueno front bumper,the lip to that bumper, and maybe is i can source the rear bumper also. i was thinking of calling this shop in Aus that makes custom parts but WAYYYY to much money, so i reley on u guys to help me find parts for my baby. but carbon panels and etc is what i really want to get done.

freakinbox · 06-23-2006, 12:30 PM

carbon fiber parts aren't cheap...
and flashmn I see, spencer was talking about making his own hood so I thought it wasn't that hard :p

Flashmn · 06-23-2006, 01:22 PM

Well a hood is easy to make, because its just a flat pancake, fenders are not. Its funny how you (freakingbox) always try to contradict what I say... Well, the thing is, I've managed to do most of the things most posters here are only dreaming or thinking of doing.
Heres my FRP fender project, ditched due to the fact that you WONT get the 90deg angles done without a vacuum packing, so that you can still managed to remove the fender from the mold plug. How I know, because I've already tried it.

freakinbox · 06-23-2006, 01:34 PM

I wasn't contradicting anything you just mistook how I said it, was just saying why I suggested it. Funny how you (flashmn) seem to think I try to be hostile towards you <shrugs>
If you carefully read what I said since I used Thought (past tense) rather than think (present tence)....

Flashmn · 06-23-2006, 02:09 PM

has happened on other posts too...

Anyhow enough of that, its not gonna crash my world.

KnightX_AE86 · 06-23-2006, 07:14 PM

here is a site for most of ur CF parts need

http://shift-lock.netfirms.com/modst...hp?cPath=21_23

4AC = AE71 · 06-26-2006, 12:48 PM

a thanks knightx,its a awesome site,now i think i can get everything i need for my car. thank u all for help cause on other forums i get no help at all, so thank u.