Stock... Audio... ARGHHHG!

[AliasJerk]

Well, I miss my subwoofers I kept the ones from my contour, but as stupid as I am I decided to sell the car with the JVC KD-SH99 HU in it... Im an idiot.

The toyota headunit is junk, im sorry but toyota effed up in the audio department of this car, its just horrible, I got the "prenium" (4 Speaker) audio, and my factory 96 contour's speakers sounded way better. Anyways, now that I have this stock Toyota HU im going nuts... Is there any way I can get my subwoofers running on it? just until christmas because my mom is getting me a kick ass one for christmas, id rather have a kick ass head unit for free, they buy a cheap crappy one...

The amp is a Rockford Fosgate 360a2
The sups are two 10 inch Earthquakes.

[REN69]

Yeah, get a line level adaptor from an audio shop since the OEM deck doesn't have audio outputs for RCAs.

[AliasJerk]

Originally Posted by REN69

Yeah, get a line level adaptor from an audio shop since the OEM deck doesn't have audio outputs for RCAs.

Bitchin'... Although, I look for a line level adapter at the radio shack website, and they dont have anything of the sort... can you give me a direct link to something I might be looking for?

[REN69]

Don't look at Radio Shack, go to an actual Car Audio shop and get it. It looks like this (I actually have the same one somewhere, but I don't use it in my car)

http://www.electronixwarehouse.com/c...egacy-ln60.htm

If you shop online, crutchfield might have it.

[xXwidowmakerXx]

that freakin awsome, thaks for the info ren, and the question. i have the same problem.

[REN69]

[AliasJerk]

I have another question about it... I ordered the part, I found one for $12 shipped, its a Legacy N60... But Im having a hard time with one wire, and thats the Remote wire, the one that sends a signal to turn on the amp once you turn the car on... Which wire do I splice into behind the Head unit?

[turnstylez18]

go to audiocontrol.com and look for a line driver...they have one especially made for oem head units...audiocontrol is the best for linedrivers

[AliasJerk]

Originally Posted by turnstylez18

go to audiocontrol.com and look for a line driver...they have one especially made for oem head units...audiocontrol is the best for linedrivers

OK, so I went to audiocontrol.com and found out that anything with a line driver is about $90... im sorry, but that defeats the purpose of this project, I wanted to do it cheaply because this is temperary for about... 5 months. Plus im reading about line drivers, and I dont see how they can be used to turn the amp on and off whenever I turn my car on and off...

[REN69]

try either the blue wire for the power antenna, or a blue and white wire... by this I mean the ones coming OUT of the head unit.

[AliasJerk]

Originally Posted by REN69

try either the blue wire for the power antenna, or a blue and white wire... by this I mean the ones coming OUT of the head unit.

Dont have a power antenna... Does that mean I still have the wire for it?