Anyone need Stock AE86 parts.

[ek-9]

- almost any iterior panels
- rear seats
- rear view mirror
- windows
- anything else you might need, post it here. My parts car will be junked within the week if not sooner.

[Jzs147-RR]

I need two things a clutch master cylinder and slave cylinder you got them ?Im also looking for a set of head light motors ..

[driiift_hachiroku]

rear axle from caliper to caliper is what i need.

[Voodoo.Priest]

What gen 4A-GE engine you got under the hood? That is if you are selling the engine.

[AEugene86]

drivers side kick panel. is your interior black?

[Deep]

ebrake cable if you've got a good one (the whole thing front to back,) possibly the O2 sensor and TPS.

[boroEF]

Originally posted by Voodoo.Priest
What gen 4A-GE engine you got under the hood? That is if you are selling the engine.

uhhh ae86 only came with bigports

[ek-9]

ebrake is rusted and severed

interior IS black ... I'll have to see if I can find that kick panel

the motor is in pieces. it's my build-up motor.

calipers are being rebuilt for my car. the axles are still there, but I'll have to figure out how I'm going to roll the car away without axles. unless you know a way.

no head light motors. I'll have to check if the clutch master/slaves are still there.

[Voodoo.Priest]

Originally posted by boroEF


uhhh ae86 only came with bigports

Confused? Well some of these AE86s original engines have blown and been replaced by another engine which may not have been that same gen as originally equiped.

[cosmicbutthairs]

Rust free Driver side Fenders both front and rear (I know its a long shot), some bushings for the front suspension and misc parts whatever you can throw in for me if I buy those things off of ya.

[ek-9]

you guys are asking for the impossible ... fenders? are you kidding me? have you seen pics of my parts car i'm lucky it's not a pile of rust flakes. and bushings from a car this old ... well, i don't think i could take them out without them cracking.

[boroEF]

Originally posted by Voodoo.Priest


Confused? Well some of these AE86s original engines have blown and been replaced by another engine which may not have been that same gen as originally equiped.

puttin in a small port 4age into an ae86 requires custom modification to the intake manifold and moving the starter to the other side...i dont think ppl will go through with that...they'd just opt for a big port again :p

esp on a car that's being junked....why would it have a small port or 20v or whatever

[cosmicbutthairs]

do you have a stock tape deck?
I'm sick of listening to the radio!

[ek-9]

you have a radio? lucky ... i just have engine noise

[86B]

Originally posted by cosmicbutthairs
do you have a stock tape deck?
I'm sick of listening to the radio!

I think i have a tape deck...
Let me check... i'll get back to you...