AE92 GTS Ground Effects Swap

[thrustangle]

I got my hands on an '89 GTS ground effect setup for my '89 SR5. Anyone familiar with what it will take to install them on my SR5, such as any drilling, necessary clips, etc.? Thanks.

[toyotaspeed90]

drilling is required in the lower areas.... i personally just cut off the 'pointer' that goes into the body on the upper part of the skirt

[89yotarollagts]

i dont remember many clips... just a bunch of screws... you have a few under the car, and a few on the front wheel well,& rear wheel well.. Try using some kinda sealer on the seam where it meets the door/quarter panel ! This will help moisture from getting trapped inside and begin rustin your panels... those of you who own a GT-S & recently painted it know what im talken about lol

[diver9000]

Hey Dan,
How goes the turbo project?

[89yotarollagts]

^ Shhhhh What turbo project

[freakinbox]

just remember if you do seal it, DO NOT DO IT ALL THE WAY AROUND, only do the top

[diver9000]

Oh my bad, I had you mistaken for someone else. Sorry

[REN69]

Originally Posted by 89yotarollagts

^ Shhhhh What turbo project