AE82 20v swap

[rollagtsracer]

I need help on doing tthis swap like what all am i going to need and what all is involved

[wiccanferret]

Originally Posted by rollagtsracer

I need help on doing tthis swap like what all am i going to need and what all is involved

Do you want a detailed write-up on installing that engine in every Corolla ever made or would you prefer it in MPEG format along with a free IPOD video so that you can view it step by step while you do the job?

Seriously...you think we're all mind readers?

[EverAE]

lol ya i'm doing the same swap, but you should try reading and explaining yourself...if it's carby it'll be different, or if it's a fx-16 with a 4age then it'll be different. Depends on tranny. Go to www.twincam.info or www.ae82ownersclub.com if you want more ae82 specific info.

[rollagtsracer]

It is a 1988 Toyota Corolla FX-16 GTS 4age FI 16v i just want to do a 20v swap for the little extra horses and maybe a turbo job in the futurebut im am no quite sure how to go about it

[punter]

Then its nice and simple, your fuel system is good enough for a standard 20v, the engine will just bolt straight in, you can even use your current gearbox and flywheel/clutch if you want.

The only hard part is the wiring of the engine. make sure you get a full loom and ECU, from there you can use the pin outs from club 4ag to match it all up.

If you thinking of turbo in the future then get a silvertop, they have the strong rods.