NEED Help blown head gasket 93 corolla 1.8 and bad rear motor mount - Toyota Nation Forum : Toyota Car and Truck Forums

darcsyde · 12-07-2006, 08:25 PM

how i go about changing them

medicstudent01 · 12-08-2006, 11:01 AM

Couple different options:

1. Drive/Tow the car to a shop and tell them to diagnose/fix the car.

2. Buy a manual or subscription to Alldata.com and read over the procedure. Pick up a basic set of hand tools and go to town on it. Once the head is off, have it pressure checked/surfaced if necessary. Buy a head set/new bolts/timing belt and put it back together.

ghost_ryder35 · 12-10-2006, 12:21 AM

Quote:

Originally Posted by medicstudent01

Couple different options:

1. Drive/Tow the car to a shop and tell them to diagnose/fix the car.

2. Buy a manual or subscription to Alldata.com and read over the procedure. Pick up a basic set of hand tools and go to town on it. Once the head is off, have it pressure checked/surfaced if necessary. Buy a head set/new bolts/timing belt and put it back together.

darcsyde · 12-12-2006, 10:06 PM

it's coo i got it off and did a 3 angle too it changed the cam gear to an obx-r cam