Body kit Question

[Aero]

Will the body kit *front* for the AE101 fit the corolla 93-97 *AE100*

[Chris Corolla S]

This question confuses me because the '93-'97 Corolla with the 1.6 is an AE101, while a 93-97 with the 1.8 is an AE102.
Mostly they are all called AE102 to avoid confusion with the Japan Spec AE101.
So what car's front bumper do you want to fit on the '93-'97 Rolla? Or are you talking after market body kits? Just give the year and name of the car and drop the chassis code if ya can't get it right.

[Aero]

I really dont know the year but here.

http://www.bomexaero.com/prdtyae101u.htm

or maybe this.

http://www.bomexaero.com/prdtyae111u.htm



coz Im looking for the FREEWAY body kit but I cant seem to find one.

heres the pic.
http://www.corolla-racing.com/images...a_corolla.html

[Flashmn]

AE111 is the japanese 20V levin...
AE100 = 93-97 1.3
AE102 = 93-97 1.6
Thats how I remember it being... I dont think there is a 1.8 in 93-97 models.. and if there is I think its the same as an AE102

[Chris Corolla S]

Sorry Flashmn, I am talking about North American Rollas and there was certainly no puny 1.3 for us. I know what I said before is accurate. For North American coding, 93-97 with 1.6 is AE101 and 93-97 with 1.8 is AE102. These are the 4AF-E and 7AF-E motors respectvely.

A body kit for any 93-97 Corolla should fit any other 93-97 Corolla.

let me check that site out...

[Chris Corolla S]

O.K., those kits will not fit. Those Levins are coupes and I'm assuming you have a North American 93-97 Rolla which is of course a four door.

That yellow Rolla that you like has an AE101 bumper, which is probably part of the reason he was able to fit that kit. Also, it says the kit was made in Hong Kong, but I didn't see that it was made by Bomex, are you sure that's who makes this "Freeway" kit?

[Aero]

Yes, Bomex didnt make the freeway kit.


your right the levin AE101 *JDM is a 2 dr coupe.


yes I got a USDM 94 rolla'


I was only askin if the front skirt can fit in the USDM rolla because. of this:

AE101 JP Corolla FX bumper

the car looks like a 93-97 USDM rolla. and it says on the spec that it has a : AE101 JP Corolla FX bumper *I assume that JP means JDM*


so I gave bomex as an example. coz it look a lot better than erebuni or any other front skirts that andy's auto sell.


and FREEWAY body kit is the side skirt I think.

[Chris Corolla S]

Oh, so you just wanted to know if the AE101 bumper would fit. I would agree with you that that yellow Rolla is the same as yours and since he has the AE101 bumper I'm assuming it would fit. But we don't know if he had to make modifications to fit it. I would ask this over at www.corollacustomz.com and www.vvti.net because they have a shitload of 93+ Rollas over there as compared to T.N. I would say Corolla Customz is your best bet... Actually if you could contact the owner of that car that would be the best

[ractive_roLLa]

i have a 94 corolla.. its ae101

[Chris Corolla S]

This is a good quote from corollaperformance:

Before I proceed further, I must bring to your attention some overlap in Toyota's use of designations. In most or all of the US, AE102 designates those Corollas with the 7A-FE engine, while AE101 designates the 4A-FE models. Toyota probably did this just to make distinguishing parts for the two easier. On a more global scale, however, AE101 actually designates a late model Levin, quite different from a so-called AE101 US Corolla. Since the Levin is not available in the states, Toyota probably didn't think the overlap would concern consumers...until I came along. Since the Toyota culture is more global than local, from this point on, AE101 will designate the Levin while AE102 will designate the Corolla of interest. I encourage you to make this distinction, and keep it in mind when looking for parts.

The bumper being discussed is from the "JDM" AE101, whcih is a Levin.