4-AF questions

[xthecaliforniax]

Is there anyway to get a intake onto a 4AF and what kinda tuner exhuast are available for my car that arnt to bad to put on

your help will be appreciated

[fistofmeat]

for a 4af intake, just take off everything from the filter box to the throttlebody, get an intake pipe wth a hole and a vacume tube line, get a good coupler (one that wont decompose) and a good filter. you also need 3 4inch diameter hose clamps (the stock ones are too short). it's pretty simple, the vacume tube might be to short, so just go to auto zone and get some longer flexible tube. as for exhaust, i don't believe that they're any that were made for the 4af, so ur probably gonna have to buy a muffler and get an exhaust custom welded. if you want to do the headers too, they are available on ebay by mimoUSA and Pacesetter, or i believe you can get them directly from them (the black Pacesetter ones lose their lack coat pretty fast, it gets burnt off shortly after installing it).

[mrtohil]

Are the pace setter exhaust any good? I read on their site and on ebay that "some fabrication required". I was curious as to what the extent of the "fabrication" was. I asked the seller on ebay how far the headers went and if it'll eliminate the flex section. And all they could come up with were ..."as listed, some fabriction required"(they must of thought I was some inexperienced kid or something). I also saw those Mimo headers inline also. They seem like a direct bolt on all the way to the cat. I have a '92 geo prism with a 4afe motor. The flex coupler in the exhaust has broken. And since I'm there I might as well upgrade. So I'm looking around and asking questions.

[EverAE]

i don't have any first hand experience with pacesetter, but i've never heard anything good.