service manual for Corolla GT-S (AE92)

[I hate Toyota Corp :(]

Does anyone have a service manual for the AE92, i need to take the dash apart in my car so i can change the lights in the dash. If anyone has digrams or pics, it would be greatly appericated.

[boroEF]

i could try and get mine scanned for you...

[4AFred]

its not that hard, just remove the screws...
i did it on the weekend...didnt need diagrams...
just be prepared to remove a ton of stuff...

[TRDragoon]

heres a good suggestion b4 you start....goto the local pick yourself junk yard and look for an AE92, and start stripping....after you get the hang of it, leave the yard immediately....go back home and do the same with your car w/caution

[4AFred]

Originally posted by TRDragoon
heres a good suggestion b4 you start....goto the local pick yourself junk yard and look for an AE92, and start stripping....after you get the hang of it, leave the yard immediately....go back home and do the same with your car w/caution

very good advice.. thats what i did before removing my interior to replace one stupid buld (which still isnt working )

[elrick]

can anyone help me?.....
i just bought a toyota ae92 last year and swap the engine with 4AG-ZE last month, my problem is, after they install the engine, the head light was disturb(driver side) and now the head light beam is to low and i barely could see at night when driving, i want to adjust it myself but i dont know which 1 to turn bcoz there 2 adjustable screw in there, 1 is on top and the other at the back of the head light, i've tried adjusting both screw but nothing happen...can anyone help me with dis?, i know its kinda stupid question but i really need help.....

[PhatRoyale]

Originally Posted by elrick

can anyone help me?.....
i just bought a toyota ae92 last year and swap the engine with 4AG-ZE last month, my problem is, after they install the engine, the head light was disturb(driver side) and now the head light beam is to low and i barely could see at night when driving, i want to adjust it myself but i dont know which 1 to turn bcoz there 2 adjustable screw in there, 1 is on top and the other at the back of the head light, i've tried adjusting both screw but nothing happen...can anyone help me with dis?, i know its kinda stupid question but i really need help.....

Make a new thread and ask your question there, don't bump a thread that's almost 6 years old. locked.