Qustion for Pun

[SR5 Rolla]

Im going to be doing a reaer disc brake conversion from a gts. If you have the time could you gimmie like a diy so I can do this? My brakes are fucked and i don't want drum brakes. Thanks man. -Josh

[|PuNiSh3R|]

Well first things first.. start off by getting yourself some rear discs from an '89 corolla GT-S coupe. Get the calipers, hoses, wheel hub/axle assembly... that whole piece that bolts up to the strut and suspension carriers.. Get the brake proportioning/metering block off of the fire-wall too.. I would recommend getting new discs.. ain't that expensive over the junk yard scrap rusted to hell shit.. and I myself had the calipers and axle carriers sand blasted because I painted it all.. I had rust, what the fuck is the point of rims that show through if you have rusty brake/suspension equipment?

Do that then get back to this post and I'll put more info up.

[SR5 Rolla]

I got it. My dad can sand blast the peices at work. U didn't think I was gonna do it up ghetto style? Im gonna attempt it all this weekend..my brakes are fucked so I have no choice..thanks alot man. -Josh

[|PuNiSh3R|]

Ok well blast that shit and I'd recommend to paint the stuff with Dupli-Color MetalCast paint.. works really well.. first put down the Adhesive Promotor then put down the ground coat and then do the color.. I'd recommend 2 coats of the adhesive, 2 coats of primer.. and 3 coats of color and then I just used an engine enamel to finish it off.