what 2 do????

[RedruM]

okay guys here's my problem..


i've got the redtop in my car and i have the harness now but haven't hooked it up yet

so do i hook it up and make it redtop

or do i

get the T-vis adaptor and use that intake with my redtop??

and if i do that which harness do i use??

the redtop or bluetop??

[martiniracing]

i would imagine, if you are using redtop engine and redtop harness, just stick with redtop ecu. don't even bother with the tvis adapter.

if you wanna use your redtop with the tvis adapter, you dont' even need to use the redtop harness.. just use the bluetop ecu and harness to control the bluetop sensors

[hachi_slow]

Since you say you have the harness already(which apparently you've been looking for for a while), go full redtop.

[RedruM]

woot

redtop it is

[TRDragoon]

^you're confusing your self even further when you dont even need the head ache

i think shaun is your best friend

[boroEF]

^rofl

minesh u need blacktop ecu and 3sgte wiring harness in order to use tvis intake manifold. u will also need a camry v6 intake manifold gasket to use the tvis manifold

[project trueno]

i would use the complete smallport (since your harness alrdy is configured for FWD, us RWD ppl have to splice and dice).

Afterwards i will swap the whole valvetrain (with cams) from a bigport to a smallport, free cheap upgrade

[boroEF]

Originally posted by project trueno
i would use the complete smallport (since your harness alrdy is configured for FWD, us RWD ppl have to splice and dice).

Afterwards i will swap the whole valvetrain (with cams) from a bigport to a smallport, free cheap upgrade

why? wouldnt it be similar...i'm aware that bigport cams are longer duration...but lift is pathetic! lift on redtop cams are much more...educate me mr brilliance