Quote:
Originally posted by TRDragoon
^ if you are doing AE86 engine swap, MR2 tranny will not work since its transaxle.
just rebuilt the old tranny. some time if your synchro is bad, try bleeding your clutch master/slave fluid....but if its black, don't bother, cuz that'll make things worse.
|
You won't be able to use the T50 tranny with the stock 4AGZ flywheel without machining the bellhousing to clear the flywheel. The stock 4AGZ fly is too big (224mm). That being said, use either an AE92/101/111 flywheel (212mm) or the original AE86 flywheel (200mm). Get a new T50 tranny if your current one is having problems. That's cheaper than doing a rebuild, IMO, however, the T50 is not very tough, so if you plan on running more than stock boost on the 4AGZ, then maybe a tranny upgrade should be considered...