Weber project updates

[Flashmn]

Ok, I think I should be able to put these on the car tomorrow

[knuckleduster]

very nice

[automatic]

Sweet, the sound alone will be incredible.
Have they been run/jetted for a motor like yours?
If you're starting out with jetting from scratch, PM me, if you're interested, and I'll share some performance tricks that I've learned over the years/several sets of 40 DCOEs.

[Flashmn]

the jettings are close...
I'm slightly worried about the idle jets, they're on the rich side of the scale 55 F8.

[2wickedtoyz]

your going to pay for my cleaning bill


those look sooooo sweet. when you get them on and it running we're going to need sound clips

[MR1]

Originally posted by Flashmn
the jettings are close...
I'm slightly worried about the idle jets, they're on the rich side of the scale 55 F8.

as long as the plugs don't foul em, you "should" be fine tho no?

my experiences w/ carbs have been only one per cylinder and i've yet to run more than 1 cylinders so i could be wrong.

[Flashmn]

Those are 1 per cyl. Richness does have its downside, wont pass emissions if it too rich, CO levels jump up

[MR1]

i know those are 1 per cyl.
but i've never had something carbed w/ more than 1 cyl

[Flashmn]

same principal really.. its like I have four 400cc engines in a row.

[Flashmn]

Trying to synch them and when thats done, its all installation in the car thats left to do.

[micro214_kp61]

hey Flashmn... have fun tuning it!

[Flashmn]

No worries I've done this before

[Ukrainian102]

When I clicked this I thought you were talking about a grill.

Anyway, I don't know anything about carbs but they sure look cool.

[Flashmn]

When I clicked this I thought you were talking about a grill.

hahaha, I do have one of those too