Vacuum on 4AF Carb

[Fang50]

Need help asap....I replaced gasket on my 4af...AE92 rolla carb, problem is that I forgot to mark the vacuum pipes when I unplugged them, now cannot get the car to idle correct. I need to know if anyone has a schematic or picture ..pref top view of the 4af carb showing all the vacuum pipes and there placing...pls help me....Model is 93 16v Twincam

Regards
Ebrahim

[Theron]

My suggestion would be to get a dealership manual. There is everthing you need to know about your car in it. Probably be 80 bucks or so. The cheap way is Chiltons, but that diagram sucks

Another suggestion is to do away with you vacuum and do a different carb set up. such as a DGEV Weber or custom manifold with dual 40mm carbs

the only problem with that is emision testing will probably not pass

[Pineapple]

Hmmm should be some label on the hood.

[Flashmn]

the label on the hood wont give you detailed info, only the distributor or so...

[ZXT]

Hope this help. I'll try to get a better angle maybe tom.