polyurethane bushings

[evilinside]

how is it going....was wondering if any one knew where i could find polyurethane bushings for the rear suspension on a 1980 corolla.....only ones i found were for the front control arms.....strut rod....and the endlinks.....but i also need the rear upper and lower control arms....and the lateral control rod.....thanks

[Tercel GTS]

I made my own for my Tercel.

Replacement project car

[evilinside]

intreguing....the thought did cross my mind.....but always have to ask first....thanks...

[Tercel GTS]

If you buy the kit it only takes 1/3 of the smaller kit to make the 2 bushings. Look at the link for schmoot and there's a place where you can order the materials. I bought'm through a local company for $50

[evilinside]

what did you do to get the stock bushings out???.....

[Tercel GTS]

Drilled the rubber then used a high speed grinder like used for porting cylinder heads.

[Chris Corolla S]

We need some kind of "shade tree mechanic DIY" smiley.