Help! shopping for 96 ROLLA COILOVER SPRINGS

[ctam1986]

I'm a newbie here.
i found some coilover Springs on Ebay. I don't know if any one has tried those yet?
Are those good? I don't have over $150 for the new Coilover springs, and i'm just want to drop my car 2-3". appreciate all the help. thank you

[ctam1986]

here are those:
http://cgi.ebay.com/ebaymotors/ws/eB...category=33586

http://cgi.ebay.com/ebaymotors/ws/eB...category=33582

http://cgi.ebay.com/ebaymotors/ws/eB...category=33582

thank y'all

[4Aaron GE]

If all you're going for is looks, then these might do you fine. However, keep in mind that you get what you pay for. These ones are $36USD. A set of Ground Control ones are more than ten times that. I don't know about the X3s, but I can attest to GC using quality parts.

[ctam1986]

yeah maybe i try to buy a better ones. any idea on the good brand for about $200 in my pocket?

[ctam1986]

yeah maybe i try to buy a better ones. any idea on the good brand for about $200 in my pocket?
apprecite your help

[ctam1986]

here are the better Coilovers Springs I found on Ebay:

OBX: http://cgi.ebay.com/ebaymotors/ws/eB...MEWA%3AIT&rd=1

DropZone: http://cgi.ebay.com/ebaymotors/ws/eB...MEWA%3AIT&rd=1

Arospeed: http://cgi.ebay.com/ebaymotors/ws/eB...MEWA%3AIT&rd=1

Eibach Pro kit: http://cgi.ebay.com/ebaymotors/ws/eB...967913310&rd=1

which one is best for the price and for daily driving?
thank you

[4Aaron GE]

Go with Eibach.

OBX, I just don't trust with safety related items.
Dropzone, I've got no idea
I don't know much about Arospeed. I do know that they also have a line of mufflers. On that alone, I'd probably avoid them.

Eibach makes suspension parts, and ONLY suspension parts. They know what they're doing.

edit: the prokit might not get you the drop you want though.

[rated_w]

you get what you pay for..

I would recommend ground control coils.. but they are rather expensive.

[ctam1986]

Hey 4Aaron GE! why is the pro kit of Eibach might not get the drop I want ?
thank you! appreciate your help

[4Aaron GE]

The prokit lists the drop as 1 inch.

you wanted 2-3, right?