Any body ever heard about IZZFE mods???

[Doune_69]

I kind of look every where for parts, FAQ or other thing you can do with IZZFE engine for my 1999 corolla but i find nothing so if any body know any thing about that it would be great to share the info with me


thanx doune_69

[Dr Tweak]

Well you can check www.monkeywrenchracing.com

And I'll be offering some stuff in the near future. What are you looking for?

www.phoenixtuning.com/

[Doune_69]

I wanted to put in conecting rod piston header cams and on and on and on

thanx for the link!!!

[Doune_69]

I wanted to put in conecting rod piston header cams and on and on and on

thanx for the link!!

[IZZ-FE]

So far here in Australia we've explored most external engine mods with very good success. We've done baseline Dyno tests on a 1zz-fe Corolla and continued testing with the same Dyno ( because they all vary in results slightly ) after each mod.
At standard it produced 76kw at the wheels. After the addition of an AEM CAI ( Fitted with a ITG pod filter ), Genie Extractors, a 2.25 inch cat back exhaust system and the Throttle body coolant bypass it produced 91.6kw at the wheels. Mid range torque was boosted. A TRD CAI will do the same job however it's been proven the AEM is slightly better for torque. Another izz-fe fitted with the TRD supercharger, CAI and 2.25 exhaust is apparently putting out 120kw at the wheels.

[REN69]

What's the kw to hp conversion.. we don't use kw in north america as kw is really an "electrical" measurement when you think about it.

[IZZ-FE]

Sorry
It's 1.3hp per 1kw so it was putting out approx 98.8hp at the wheels stock ( Also that was on a Dyno Dynamics dyno in shootout mode) and then after the mods it was putting out 119.08hp. Considering the mods made it goes to show the 1zz-fe is quite restricted in stock form.