camcon in an XRS. WOW!!!!!!!! - Toyota Nation Forum : Toyota Car and Truck Forums

koggles_xrs · 07-22-2005, 03:55 PM

i finally got my camcon into my corolla. lets just say wow! just with the sugjested baseline tuning from power enterprise i can actually feel a differance. Toyota tunes the 2ZZ so that the torque curve drops right before the cam swich. this is all but eliminated. i can almost no longer feel the crossover. the motor just keeps on pulling. i cant wait to get it on the dyno to do the final tuning.

kini · 07-22-2005, 05:44 PM

Camcon? Do you have a controller that can set or vary the RPM at which "lift" occurrs.

If so, I'm interested in where, how etc....

Please let me know.

Thanks

koggles_xrs · 07-22-2005, 09:27 PM

No it changer the advance and retard of the intake cam not the crosover point. it would be cool but the only way so far is to go with a standalone computer. The camcon is still worth the money in my opinion. it can also adjust fuel control

***silver04rollas*** · 07-23-2005, 01:46 AM

Nice. It is good that you smooth out the torque dip just before lift. I guess you cannot feel lift anymore right??? By the way, JCTurbo (9thgencorolla.com) is developing a PFC for the XRS that will allow you to lower lift and raise rev limiter to 8600 rpm or so.

coogarxrs · 07-23-2005, 02:31 AM

dude, thats real sweet. did u tune the A/F or just VVT. we need pics and the numbers u used when ur done tuning. way to go man.

koggles_xrs · 07-23-2005, 09:06 PM

I've only run into one minor hickup so far. Today i was cruising over to the store and my car stalled at about 3000 rpm and my check engine light came on. I reset the light and turned down the cam setting at 2000 to 3500 to +1 instead of +3.It seems ok now. my buddy and i just finished putting his in his TC and no problems at all. his camcon made a HUGE differance. dyno tuning should happen next month. ill keep the info going. ps still worth it.

BIO · 07-24-2005, 06:13 PM

act or ually u guys have to check this forum JC is gonna lower the lift engagment point to 5800 or 6000 well any ways hope u join the site cuz we will like to hear about ur camcom with the 2zz thank guys
http://9thgencorolla.com/forums/viewtopic.php?t=3201

kortik · 12-06-2005, 01:28 AM

Camcon GB if anybody interested.

here: $330 shiped details here:

http://matrixowners.com/forums/Feele...ed-t49379.html

BIO · 12-06-2005, 07:07 AM

Is There Ne Updates With The Dyno Sheet In This Tread????

357wheelgunner · 12-06-2005, 05:51 PM

Wow they filter out www.*************.com? what about trying www. 9th gen corolla .com without the spaces?