hmm...... :)

[toyotaspeed90]

I'll give details later... hood is still off and it's still on jackstands..... but, i have started it:

[REN69]

I can hear the trumpets already.

[Hook]

I'd hit it

[4Aaron GE]

Very nice. Is this going to be a MS setup for air/fuel?

[Liter]

i want one

[micro214_kp61]

uber nice!

[toyotaspeed90]

actually right now i have it running on the 4afe ecu still!!!!! the only problem i seem to have is a rough idle.... and it idle's at about 500rpm...... but throttle response is great and i gained a bit of low end torque!

[CorollaDX-R]

Originally Posted by toyotaspeed90

actually right now i have it running on the 4afe ecu still!!!!! the only problem i seem to have is a rough idle.... and it idle's at about 500rpm...... but throttle response is great and i gained a bit of low end torque!

is ur hood done yet?? heheh... u spend too much time on ur mr2 hahaha...

[4Aaron GE]

Hey, about that 4A-FE ECU, I keep forgetting, how did you get around that whole rev limiter thing?

[toyotaspeed90]

swap out a couple crystals in the ecu... it slows the clock speed and extends the rev limiter.....

[PPW-546]

are those throttles from the 20V Blacktop unit or a customized one?

[toyotaspeed90]

from a silvertop.... but it took a lot of work to get them to bolt up

i'm pretty sure the bad idle and excess fuel consumption is from lack of a good map reading (i'm assuming)..... i need to get a vacuum collector..... and also need to redo some of the wiring so it doesn't look terrible

[REN69]

there's a reason why I said "trumpets" before.

[Ukrainian102]

Originally Posted by REN69

there's a reason why I said "trumpets" before.

Carbs!

[toyotaspeed90]

ummm......no