Turbo Charger

[klone1000]

Whats up guys is there any way that you can turn a new turbo around without messing up the seals. By turning around I mean to change the position of the outlet port so that it is at the bottom instead of the top??????? The problem that I have is my radiator is in the way of my outlet port of my t3 turbo..... Need to reposition the outlet tube so it faces the bottom of the car. You understand?????

[alltracman78]

Yes.
Remove the clip that holds the compressor housing on, remove the housing, remove the lock [roll] pin [if it has one], reinstall the housing at the desired angle. You can rotate it some if need be.
The only hard part is you are going to have to make the wg actuator attach to the housing in a different way. A bracket or such...

[klone1000]

well I will be using an external wastegete with an t3 turbo.. Thanks for the info...........

[Tercel GTS]

You shouldn't have to remove anything from a T3, just loosen the bolts on the end you wish to turn and rotate it. Then retighten the bolts.