|
Unless you manufacture some sort of a heat shield you wind up pulling in all hot air via the engine compartment. You will however see a very moderate gain on the intake improvement. Not much realy. You will have better in-flow of HOT air as opposed to maybe a little less but cooler air.
The problem most people do not realize is that where you put in you in turn must put out.
I always tell people if you are not going to upgrade the headder on out, there is not a whole lot of point to modding the air going in.
Last edited by 19Celi87; 05-17-2006 at 12:40 PM.
|