st185 exhaust manifold

[89SV21]

I'm trying to find an st185 3sge exhaust manifold. I've been told that it will bolt on to the 3sfe without any problems. One thing i was wondering though is if the 3sge piping will mate up with the stock 3sfe exhaust without any modifications. I went to 10 junkyards today and was unable to find the gts manifold. I found a gts but it didn't have a motor in it, bust. Also lots of the junkyard guys don't even know what the 3sge is they've only heard of the 4afe and the 5sfe. Thanks in advance.

Nick

[sameerb1]

there is a problem with my cars exhaust manifold too. some exhaust repair guys told me its totally repair able. so why take so much hastle tryin to find another one?

[ST185]

First, ST185 (Alltrac) comes with 3SGTE not 3SGE
Second, ST185 is NOT a "GTS". GTS comes with 5SFE.
If you are planning to turbo the 3SFE in your SV21, you will need a downpipe too.
3SGTE downpipe will not made to your 3SFE exhaust.
So, this must be custom made.
So, the only thing that bolt on is the manifold to the head.
By the way, 3SGTE exhaust manifold can be found on the MR2 Turbo too.
Roughly $30-$40 + shipping for the 7-stud version and a little bit more for the 9-stud version.

[Pineapple]

3S-GE come with header, not manifold. Its a NA engine, not turbo.

[Accumick]

Guys, I am new here. I do have a 1994 3S-GE III(the one before BEAMS) in my Corolla(AE9#). I am planning to make the exhaust my my self due to no standard application is available for me. Therefore I have found this site http://www.burnsstainless.com/, they provide custom made joint collectors. Just for your reference.