OIL FEED LINE, for Turbo :-) - Toyota Nation Forum : Toyota Car and Truck Forums

Createdtoburn · 05-01-2007, 11:07 PM

I have a 92 Celica, 1.6L ST model. I just need to know where a really good place to run a oil feed line from for the turbo Im putting on. I really dont want to drill into my block. Just doesnt seem like a good idea, you mess that up and you mess your engine up. I have a good running engine too.

Anyway, so is there anywhere else on the engine I can tap a oil feed line from?

Createdtoburn · 05-05-2007, 09:29 AM

Anybody?

RedPhoenix · 05-05-2007, 12:34 PM

tap in through the oil pressure sensor on the block. just get a T for it. The oil pressure sensor sits on 1 side of the T and the oil line for the turbo can come from that too.

I have a -3an SS line and an oil restrictor for sale if needed, LMK

you can see on my block how I have it tapped

Punisher3sgte · 05-06-2007, 01:21 AM

Ya, use the head. You really don't need much oil to the turbo at all anyway.

Createdtoburn · 05-07-2007, 09:42 PM

have any more close up pictures?

Pineapple · 05-08-2007, 03:07 PM

^ It won't help. You got 4A-FE, he got 5S-FE. Your sensor is around oil filter.

Createdtoburn · 05-09-2007, 03:11 AM

I know it aint the same engine... but somewhat smiliar. Just lookin for ideas. My oil pressure sensor I think is actually on the side of the head. It has a two wire hookup and its octagonal like so you can wrench it off. And its green. Dont know for sure though.