No power in gear

[kerwinq]

Getting back to working on the car again. Have a rebuilt engine that I have running but when I try and drive it does not have any power. When sitting I can rev the engine and it will respond with no issues. I believe the timing to be correct and all vacuum hoses are connected. I talked to someone the other day and they were saying something about having to reset the computer after a rebuild but not sure if this was one that had to have that done or not and I have never heard of that before.

There is new plugs/wires/cap/etc

I am probably missing something easy but need some pointers on where to look and possibly what have wrong.

Thanks for any advice you can help me with

Kerwin

[toyomoho]

No power when in gear but OK when out of gear may mean the engine is not getting enough fuel. Fuel pump, pressure, filter, etc.