ST162 mods

[vesh]

what can i do next?

i hav a 88 celica with a 3S-GE. i bought it with forged pistons, bored to 2.2L, mild head port and balanced engine. it has 2.25inch exhaust and simota air filter. i hav lowered it with s/low kingsprings. it goes pretty good, but i wanna know what the next mod would be in terms of speed? i dont wanna turbo. can u do anything to the computer on these?

[boroEF]

On 2002-03-12 01:15, vesh wrote:
what can i do next?

i hav a 88 celica with a 3S-GE. i bought it with forged pistons, bored to 2.2L, mild head port and balanced engine. it has 2.25inch exhaust and simota air filter. i hav lowered it with s/low kingsprings. it goes pretty good, but i wanna know what the next mod would be in terms of speed? i dont wanna turbo. can u do anything to the computer on these?

are the forged pistons at higher compression? if not u can shave the head and get some regrind cams! high compression+cams+P&P+I/H/E=powwwerrr

[sinistercat]

Why not turbocharge, this engine is ready internally, the only diff between this and 3sgte are the camshafts and some minor block plumbing

[caovt001]

On 2002-03-24 23:46, sinistercat wrote:
Why not turbocharge, this engine is ready internally, the only diff between this and 3sgte are the camshafts and some minor block plumbing

how do you do such a project and what do you need for it?